Basic checklist for your BMX bike.
Wheels
Good tread
Spokes in good condition
Axles not protruding more than 5mm
Tightened axle nuts
Wheel runs true and round
Bars
Grips covered at both ends
No cracks or bends
Angled correctly
Pad across crossbar
Headset
Tight
Covered by a pad
All bolts present
Accessories
No chain guard
No pegs
No kickstands
No reflectors
Brakes
Front brake disconnected
Brakes are effective
Cables are not frayed
Cable ends are present
Pads are even and not worn
Brake lever is smoothly rounded at end
Seat
Tightly fixed
No cracks
Safe
Cranks/Pedals
Tightly fastened
No movement on the pedal axle
Bottom bracket bearings must run smoothly and without play
No broken cages on pedals
Frame
No cracks
No additional parts have been added
Check welds
Safety Pads (optional)
Must be at least 1cm thick
Bar pad
Stem pad
Top tube pad
Number Plates
Cannot extend above the crossbar
Must be securely fastened
Numbers must be minimum 3” high and 1.5” wide
No stickers can cover any part of the numbers
The correct number plate must be worn for each race
You must run the last 3 digits of your birthdate at all events in Ontario and the correct plate colour.